Quarq 功率計功能特色

POWER METER FEATURES 功率計功能特色

ANT+™ 及 BLE
The ANT+ wireless and Bluetooth® low energy give you the flexibility to choose any ANT+ or BLE compatible head unit.
ANT+ 無線傳輸及低功耗 Bluetooth® 可選用相容於 ANT+ 或 BLE ( 低功耗藍芽 ) 的任一款車錶。


10K™ ACTIVE TEMPERATURE COMPENSATION
10K™ 主動式溫度補償功能

Each power meter is individually programmed using more than 10,000 data points to eliminate temperature effects on power measurement. Temperature compensation is computed and applied every pedal stroke.
每組功率計都是單獨編輯程式,使用了超過 10,000 個數據點來排除溫度對功率量測造成的影響。溫度補償的計算結果會納入每次的踩踏之中。


AXCAD™ ACCELEROMETER CADENCE
AXCAD™ 加速儀迴轉速計

AxCad offers an alternative to magnet-based measurement - for convenience and for bikes where it's difficult to install a magnet.
AxCad 取代了以往用磁石感應的方式 – 為難以安裝磁石的車款帶來了絕佳的方便性。


POWER BALANCE™ 左右出力平衡
Power Balance uses crankset torque to display the ratio of power generated in the right drive stroke (12 o'clock to 6 o'clock) versus the left drive stroke (6 o'clock to 12 o'clock) for each crank revolution. Power Balance is used to test asymmetry and is an useful aid for injury recovery.
Power Balance 以曲柄的扭矩來顯示每次踩踏時,右腳踩踏出力 ( 12 點鐘至 6 點鐘 ) 與左腳踩踏出力 ( 6 點鐘至 12 點鐘 ) 的比例。Power Balance 是用來測試兩側出力不對稱的狀況,也有助於觀察運動傷害的恢復狀況。


OMNICAL™ 全齒片相容

OmniCal means power measurement is independent from chainring selection. You can swap chainrings without impacting accuracy.
OmniCal 表示功率的量測結果和使用何種齒片沒有關聯。可任意更換齒片而不會影響準確度。


EXOGRAM™ 及 CARBON TUNED™ 
中空式碳纖維曲柄
Exogram hollow carbon crank arms and Carbon Tuned crank arms are the lightest and strongest crank arms we make for Road and MTB respectively. They maximize the stiffness to weight ratio.
Exgram 碳纖維中空曲柄是我們所製作過的曲柄中最輕、最強壯的。具有最高的鋼性重量比。


TOOL-FREE, USER-REPLACEABLE BATTERY
免工具、使用者可自行更換電池

Quarq power meters use an industry standard CR2032 battery with over 200 hours of riding time.
Quarq 功率計使用工業標準 CR2032 電池,騎乘時數超過 200 小時。


LED

The flashing green and red LED aids installation, pairing with a head unit, zeroing and troubleshooting.
紅色 LED 可顯示安裝狀態、碼錶配對、歸零及故障排除。


準確度 +/- 1.5%

Each power meter is individually calibrated at the factory and calibration values are stored in the power meter for seamless operation.
每組功率計都在工廠中各別校正,校正值儲存於功率計中。


2 年保固

All power meters feature a 2-year warranty.
所有的功率計皆提供兩年保固。