五通軸承 - T47a 30mm Bottom Brackets
動力傳遞。五通軸承是將您的踩踏施力，傳遞到車身的關鍵部件。因此摩擦力極小化和高負載耐受性是決定五通軸承優劣與否的關鍵因素。結合了輕量化鋁合金承座，CeramicSpeed 五通軸承強化傳動剛性並提供最佳的動力傳遞。我們所有的五通軸承：皆是使用 CeramicSpeed 培林，以優異的耐衝擊強度、真圓度、平整度和硬度著稱。我們的五通軸承也有提供 CeramicSpeed 鍍層培林版本。我們的特殊鍍層進一步減少摩擦阻力，並提升培林使用壽命。鍍層培林具有更高的抗摩秏性能，且幾乎不受各種汙染因素的腐蝕傷害，如水份、塵土…等。擁用超過 150 種以上的五通軸承規格：CeramicSpeed 產品幾乎可對應市場上全部的五通標準。許多高級自行車製造商都採用：CeramicSpeed 五通軸承，作為車架組的選購升級配備。配備 CeramicSpeed 五通軸承後，曲柄迴旋的順暢程度看得見、摸得著，這就是無償增速的完美示範。
T47a for 77mm asymmetrical shell.
T47a is a threaded bottom bracket shell design, utilizing the oversized interface of BB right, but with the benefit and peace of mind of a threaded interface. Compatible frames feature an asymmetrical 77mm shell width, placing the non-drive side bearing within the frame, and the drive side bearing externally.
Equipped with precision dust covers for a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency.
Bottom Bracket tool for installation: CeramicSpeed Dual Socket Tool T45/T47 16-notch 52,2mm cup tool diameter
In The Box
T47a is an open standard designed to provide the benefits of both oversized shells and the tight fit of threading. These cups and bearings adapt the shell so it is compatible with 24mm diameter spindle cranks.
Our CeramicSpeed Standard Bearings reduce drag by 75% when compared to stock bottom brackets. Down to 0.3-0.4 watts per set. This is the result of hardened-steel races combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer.
The CeramicSpeed coated Bearings feature an even longer lifespan and even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings.
Applied to the bearings at the factory is All Round Grease. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.
Installation of T47a 30mm
If you don't have any experience installing bottom brackets and bearings, we recommend that you have your local bike shop fit your new bearings. Find your nearest retailer.
Installation of 30mm crank on CeramicSpeed Bottom Brackets
Maintenance of CeramicSpeed Bottom Brackets
We recommend that you follow our instructions on how to maintain your CeramicSpeed Bottom Brackets to achieve the lowest friction and the best longevity.